GreenPlum 5.10.0 集群部署_程序开发

GreenPlum 5.10.0 集群部署

admin

2023-05-21 00:22:18

0次

第1部分初始化系统配置

1.1 部署环境

序号	ip地址	主机名	内存	系统版本	内核版本
1	192.168.61.61	gpmaster61	16Gb	CentOS 7.5.1804	3.10.0-862.9.1.el7.x86_64
2	192.168.61.62	gpsegment62	16Gb	CentOS 7.5.1804	3.10.0-862.9.1.el7.x86_64
3	192.168.61.63	gpsegment63	16Gb	CentOS 7.5.1804	3.10.0-862.9.1.el7.x86_64
4	192.168.61.64	gpsegment64	16Gb	CentOS 7.5.1804	3.10.0-862.9.1.el7.x86_64
5	192.168.61.65	gpstandby65	16Gb	CentOS 7.5.1804	3.10.0-862.9.1.el7.x86_64

1.2 设置主机名、同步时间

# 192.168.61.61
hostnamectl set-hostname gpmaster61
ntpdate -u ntp1.aliyun.com

# 192.168.61.62
hostnamectl set-hostname gpsegment62
ntpdate -u ntp1.aliyun.com

# 192.168.61.63
hostnamectl set-hostname gpsegment63
ntpdate -u ntp1.aliyun.com

# 192.168.61.64
hostnamectl set-hostname gpsegment64
ntpdate -u ntp1.aliyun.com

# 192.168.61.65
hostnamectl set-hostname gpstandby65
ntpdate -u ntp1.aliyun.com

1.3 添加hosts解析

cat > /etc/hosts << EOF
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.61.61 gpmaster61
192.168.61.62 gpsegment62
192.168.61.63 gpsegment63
192.168.61.64 gpsegment64
192.168.61.65 gpstandby65
EOF

1.4 系统内核参数优化

cat > /etc/sysctl.conf << EOF
# sysctl settings are defined through files in
# /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/.
#
# Vendors settings live in /usr/lib/sysctl.d/.
# To override a whole file, create a new file with the same in
# /etc/sysctl.d/ and put new settings there. To override
# only specific settings, add a file with a lexically later
# name in /etc/sysctl.d/ and put new settings there.
#
# For more information, see sysctl.conf(5) and sysctl.d(5).

kernel.shmmax = 500000000
kernel.shmmni = 4096
kernel.shmall = 4000000000
kernel.sem = 500 1024000 200 4096
kernel.sysrq = 1
kernel.core_uses_pid = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.msgmni = 2048
net.ipv4.tcp_syncookies = 1
net.ipv4.ip_forward = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.arp_filter = 1
net.ipv4.ip_local_port_range = 1025 65535
net.core.netdev_max_backlog = 10000
net.core.rmem_max = 2097152
net.core.wmem_max = 2097152
vm.overcommit_memory = 2
vm.swappiness = 1
kernel.pid_max = 655350
EOF
sysctl -p

1.5 修改Linux最大限制

cat > /etc/security/limits.conf << EOF
* soft nofile 65536
* hard nofile 65536
* soft nproc 131072
* hard nproc 131072
EOF

1.6 关闭 selinux 和防火墙

setenforce 0
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
systemctl stop firewalld && systemctl disable firewalld

1.7 设置XFS文件系统并挂载

#   单独挂载磁盘，设置文件系统为XFS，修改挂载方式
mkfs.xfs /dev/sdb1
mkdir /greenplum
mount /dev/sdb1 /greenplum

cat >> /etc/fstab << EOF
/dev/sdb1 /greenplum xfs nodev,noatime,inode64,allocsize=16m 0 0
EOF

1.8 禁用THP、调整磁盘预读扇区数

# 禁用THP
cat /sys/kernel/mm/transparent_hugepage/enabled # 查看THP
grubby --update-kernel=ALL --args="transparent_hugepage=never" # 设置为 never

# 创建 init.d 脚本
echo '#!/bin/sh
case $1 in
  start)
    if [ -d /sys/kernel/mm/transparent_hugepage ]; then
      thp_path=/sys/kernel/mm/transparent_hugepage
    elif [ -d /sys/kernel/mm/redhat_transparent_hugepage ]; then
      thp_path=/sys/kernel/mm/redhat_transparent_hugepage
    else
      exit 0
    fi

    echo never > ${thp_path}/enabled
    echo never > ${thp_path}/defrag

    unset thp_path
    ;;
esac' > /etc/init.d/disable-transparent-hugepages

# 注册systemd文件
echo '[Unit]
Description=Disable Transparent Hugepages
After=multi-user.target

[Service]
ExecStart=/etc/init.d/disable-transparent-hugepages start
Type=simple

[Install]
WantedBy=multi-user.target' > /etc/systemd/system/disable-thp.service

# 磁盘预读扇区数
/sbin/blockdev --getra /dev/sdb1 # 查看大小
/sbin/blockdev --setra 65535 /dev/sdb1 # 设置大小

# 创建 init.d 脚本
echo '#!/bin/sh
device_name=/dev/sdb1
case $1 in
  start)
    if `mount | grep "^${device_name}" > /dev/null`;then
      /sbin/blockdev --setra 65535 ${device_name}
    else
      exit 0
    fi

    unset device_name
    ;;
esac' > /etc/init.d/blockdev-setra-sdb

# 注册systemd文件
echo '[Unit]
Description=Blocdev --setra N
After=multi-user.target

[Service]
ExecStart=/etc/init.d/blockdev-setra-sdb start
Type=simple

[Install]
WantedBy=multi-user.target' > /etc/systemd/system/blockdev-setra-sdb.service

# 授权并设置开机启动
chmod 755 /etc/init.d/disable-transparent-hugepages
chmod 755 /etc/init.d/blockdev-setra-sdb
chmod 755 /etc/systemd/system/disable-thp.service
chmod 755 /etc/systemd/system/blockdev-setra-sdb.service
systemctl enable disable-thp blockdev-setra-sdb

1.9 配置完毕，重启服务器

reboot

第2部分安装GreenPlum

2.1 所有节点安装依赖包

yum -y install epel-release
yum -y install wget cmake3 git gcc gcc-c++ bison flex libedit-devel zlib zlib-devel perl-devel perl-ExtUtils-Embed python-devel libevent libevent-devel libxml2 libxml2-devel libcurl libcurl-devel bzip2 bzip2-devel net-tools libffi-devel openssl-devel

2.2 创建安装目录

mkdir /greenplum/soft

2.3 主节点安装软件

./greenplum-db-5.10.0-rhel7-x86_64.bin

If Customer has a currently enforceable, written and separately signed

*****************************************************************************
Do you accept the Pivotal Database license agreement? [yes|no]
*****************************************************************************

yes # 同意许可

*****************************************************************************
Provide the installation path for Greenplum Database or press ENTER to 
accept the default installation path: /usr/local/greenplum-db-5.10.0
*****************************************************************************

/greenplum/soft/greenplum-db-5.10.0 # 指定安装目录

*****************************************************************************
Install Greenplum Database into /greenplum/soft/greenplum-db-5.10.0? [yes|no]
*****************************************************************************

yes 确认安装

*****************************************************************************
/greenplum/soft/greenplum-db-5.10.0 does not exist.
Create /greenplum/soft/greenplum-db-5.10.0 ? [yes|no]
(Selecting no will exit the installer)
*****************************************************************************

yes 创建安装目录

Extracting product to /greenplum/soft/greenplum-db-5.10.0

*****************************************************************************
Installation complete.
Greenplum Database is installed in /greenplum/soft/greenplum-db-5.10.0

Pivotal Greenplum documentation is available
for download at http://gpdb.docs.pivotal.io
*****************************************************************************

2.4 创建所有主机列表文件

cat > all_nodes << EOF
gpmaster61
gpsegment62
gpsegment63
gpsegment64
gpstandby65
EOF

2.5 设置主机免密码登陆

source  /greenplum/soft/greenplum-db/greenplum_path.sh
gpssh-exkeys -f /root/all_nodes
[STEP 1 of 5] create local ID and authorize on local host

[STEP 2 of 5] keyscan all hosts and update known_hosts file

[STEP 3 of 5] authorize current user on remote hosts
  ... send to gpsegment62
  ***
  *** Enter password for gpsegment62: # 主机密码
  ... send to gpsegment63
  ... send to gpsegment64
  ... send to gpstandby65

[STEP 4 of 5] determine common authentication file content

[STEP 5 of 5] copy authentication files to all remote hosts
  ... finished key exchange with gpsegment62
  ... finished key exchange with gpsegment63
  ... finished key exchange with gpsegment64
  ... finished key exchange with gpstandby65

[INFO] completed successfully

2.6 检查主机连接状态

gpssh -f /root/all_nodes -e "ls -l"

2.7 批量创建安装用户

gpssh -f /root/all_nodes
=> groupadd -g 3000 gpadmin
[gpsegment64]
[ gpmaster61]
[gpstandby65]
[gpsegment62]
[gpsegment63]
=> useradd -u 3000 -g gpadmin -m -s /bin/bash gpadmin
[gpsegment64]
[ gpmaster61]
[gpstandby65]
[gpsegment62]
[gpsegment63]
=> echo gpadmin | passwd  gpadmin --stdin
[gpsegment64] Changing password for user gpadmin.
[gpsegment64] passwd: all authentication tokens updated successfully.
[ gpmaster61] Changing password for user gpadmin.
[ gpmaster61] passwd: all authentication tokens updated successfully.
[gpstandby65] Changing password for user gpadmin.
[gpstandby65] passwd: all authentication tokens updated successfully.
[gpsegment62] Changing password for user gpadmin.
[gpsegment62] passwd: all authentication tokens updated successfully.
[gpsegment63] Changing password for user gpadmin.
[gpsegment63] passwd: all authentication tokens updated successfully.
=> chown -R gpadmin.gpadmin /greenplum
[gpsegment64]
[ gpmaster61]
[gpstandby65]
[gpsegment62]
[gpsegment63]
=> exit

第3部分同步greenplum软件到所有节点

3.1 切换用户初始化环境变量

su - gpadmin
cat >> .bashrc << EOF
export MASTER_DATA_DIRECTORY=/greenplum/data/gpmaster/gpseg-1
source /greenplum/soft/greenplum-db/greenplum_path.sh
EOF
source .bashrc

3.2 创建主机列表文件

cat > all_nodes << EOF
gpmaster61
gpsegment62
gpsegment63
gpsegment64
gpstandby65
EOF

3.3 设置gpadmin免密登陆

gpssh-exkeys -f all_nodes
[STEP 1 of 5] create local ID and authorize on local host

[STEP 2 of 5] keyscan all hosts and update known_hosts file

[STEP 3 of 5] authorize current user on remote hosts
  ... send to gpsegment62
  ***
  *** Enter password for gpsegment62: 
  ... send to gpsegment63
  ... send to gpsegment64
  ... send to gpstandby65

[STEP 4 of 5] determine common authentication file content

[STEP 5 of 5] copy authentication files to all remote hosts
  ... finished key exchange with gpsegment62
  ... finished key exchange with gpsegment63
  ... finished key exchange with gpsegment64
  ... finished key exchange with gpstandby65

[INFO] completed successfully

3.4 同步greenplum软件包

gpseginstall -f all_nodes -u gpadmin -p gpadmin

20180801:16:39:20:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-Installation Info:
link_name greenplum-db
binary_path /greenplum/soft/greenplum-db-5.10.0
binary_dir_location /greenplum/soft
binary_dir_name greenplum-db-5.10.0
20180801:16:39:20:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-check cluster password access
20180801:16:39:21:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-de-duplicate hostnames
20180801:16:39:21:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-master hostname: gpmaster61
20180801:16:39:21:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-rm -f /greenplum/soft/greenplum-db-5.10.0.tar; rm -f /greenplum/soft/greenplum-db-5.10.0.tar.gz
20180801:16:39:21:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-cd /greenplum/soft; tar cf greenplum-db-5.10.0.tar greenplum-db-5.10.0
20180801:16:39:26:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-gzip /greenplum/soft/greenplum-db-5.10.0.tar
20180801:16:40:18:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: mkdir -p /greenplum/soft
20180801:16:40:19:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: rm -rf /greenplum/soft/greenplum-db-5.10.0
20180801:16:40:20:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-scp software to remote location
20180801:16:40:34:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: gzip -f -d /greenplum/soft/greenplum-db-5.10.0.tar.gz
20180801:16:40:43:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-md5 check on remote location
20180801:16:40:46:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: cd /greenplum/soft; tar xf greenplum-db-5.10.0.tar
20180801:16:40:49:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: rm -f /greenplum/soft/greenplum-db-5.10.0.tar
20180801:16:40:49:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: cd /greenplum/soft; rm -f greenplum-db; ln -fs greenplum-db-5.10.0 greenplum-db
20180801:16:40:50:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-rm -f /greenplum/soft/greenplum-db-5.10.0.tar.gz
20180801:16:40:50:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-version string on master: gpssh version 5.10.0 build commit:a075db4267fa1ca9e11c2c3813e3e058da4608ce
20180801:16:40:50:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: . /greenplum/soft/greenplum-db/./greenplum_path.sh; /greenplum/soft/greenplum-db/./bin/gpssh --version
20180801:16:40:51:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-remote command: . /greenplum/soft/greenplum-db-5.10.0/greenplum_path.sh; /greenplum/soft/greenplum-db-5.10.0/bin/gpssh --version
20180801:16:40:52:025448 gpseginstall:gpmaster61:gpadmin-[INFO]:-SUCCESS -- Requested commands completed

3.5 gpadmin用户创建mdw和sdw的数据目录

cat > seg_nodes <


3.6 创建初始化文件
cat > gpinitsystem_config << EOF
ARRAY_NAME="ChinaDaas Data Platform"
SEG_PREFIX=gpseg
PORT_BASE=40000
MASTER_MAX_CONNECT=1000
declare -a DATA_DIRECTORY=(/greenplum/data/gpdatap1 /greenplum/data/gpdatap2 /greenplum/data/gpdatap3 /greenplum/data/gpdatap4)
MASTER_HOSTNAME=gpmaster61
MASTER_DIRECTORY=/greenplum/data/gpmaster
MASTER_PORT=5432
TRUSTED_SHELL=ssh
CHECK_POINT_SEGMENTS=8
ENCODING=UNICODE
MIRROR_PORT_BASE=50000
REPLICATION_PORT_BASE=41000
MIRROR_REPLICATION_PORT_BASE=51000
declare -a MIRROR_DATA_DIRECTORY=(/greenplum/data/gpdatam1 /greenplum/data/gpdatam2 /greenplum/data/gpdatam3 /greenplum/data/gpdatam4)
DATABASE_NAME=testdb
MACHINE_LIST_FILE=/home/gpadmin/seg_nodes
EOF
3.7 初始化sdw主节点,部署smdw备份节点

-a: 不询问用户
-c：指定初始化文件。
-h：指定segment主机文件。
-s：指定standby主机，创建standby节点。

gpinitsystem -a -c gpinitsystem_config

20180801:16:42:41:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Checking configuration parameters, please wait...
20180801:16:42:41:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Reading Greenplum configuration file gpinitsystem_config
20180801:16:42:41:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Locale has not been set in gpinitsystem_config, will set to default value
20180801:16:42:41:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Locale set to en_US.utf8
20180801:16:42:41:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Checking configuration parameters, Completed
20180801:16:42:41:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Commencing multi-home checks, please wait...
20180801:16:42:42:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Configuring build for standard array
20180801:16:42:42:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Commencing multi-home checks, Completed
20180801:16:42:42:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Building primary segment instance array, please wait...
20180801:16:42:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Building group mirror array type , please wait...
20180801:16:42:54:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Checking Master host
20180801:16:42:54:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Checking new segment hosts, please wait...
20180801:16:43:15:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Checking new segment hosts, Completed
20180801:16:43:15:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Building the Master instance database, please wait...
20180801:16:43:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Starting the Master in admin mode
20180801:16:43:45:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Commencing parallel build of primary segment instances
20180801:16:43:45:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Spawning parallel processes    batch [1], please wait...
20180801:16:43:46:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Waiting for parallel processes batch [1], please wait...
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Parallel process exit status
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Total processes marked as completed        = 12
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Total processes marked as killed           = 0
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Total processes marked as failed           = 0
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Commencing parallel build of mirror segment instances
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Spawning parallel processes    batch [1], please wait...
20180801:16:44:31:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Waiting for parallel processes batch [1], please wait...
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Parallel process exit status
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Total processes marked as completed        = 12
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Total processes marked as killed           = 0
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Total processes marked as failed           = 0
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Deleting distributed backout files
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Removing back out file
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-No errors generated from parallel processes
20180801:16:44:48:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Restarting the Greenplum instance in production mode
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Starting gpstop with args: -a -l /home/gpadmin/gpAdminLogs -i -m -d /greenplum/data/gpmaster/gpseg-1
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Gathering information and validating the environment...
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Obtaining Greenplum Master catalog information
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Obtaining Segment details from master...
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Greenplum Version: 'postgres (Greenplum Database) 5.10.0 build commit:a075db4267fa1ca9e11c2c3813e3e058da4608ce'
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-There are 0 connections to the database
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Commencing Master instance shutdown with mode='immediate'
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Master host=gpmaster61
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Commencing Master instance shutdown with mode=immediate
20180801:16:44:48:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Master segment instance directory=/greenplum/data/gpmaster/gpseg-1
20180801:16:44:50:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Attempting forceful termination of any leftover master process
20180801:16:44:50:038105 gpstop:gpmaster61:gpadmin-[INFO]:-Terminating processes for segment /greenplum/data/gpmaster/gpseg-1
20180801:16:44:50:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Starting gpstart with args: -a -l /home/gpadmin/gpAdminLogs -d /greenplum/data/gpmaster/gpseg-1
20180801:16:44:50:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Gathering information and validating the environment...
20180801:16:44:50:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Greenplum Binary Version: 'postgres (Greenplum Database) 5.10.0 build commit:a075db4267fa1ca9e11c2c3813e3e058da4608ce'
20180801:16:44:50:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Greenplum Catalog Version: '301705051'
20180801:16:44:50:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Starting Master instance in admin mode
20180801:16:44:52:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Obtaining Greenplum Master catalog information
20180801:16:44:52:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Obtaining Segment details from master...
20180801:16:44:52:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Setting new master era
20180801:16:44:52:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Master Started...
20180801:16:44:52:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Shutting down master
20180801:16:44:54:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Commencing parallel primary and mirror segment instance startup, please wait...
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Process results...
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-----------------------------------------------------
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-   Successful segment starts                  = 24
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-   Failed segment starts                      = 0
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-   Skipped segment starts (segments are marked down in configuration)   = 0
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-----------------------------------------------------
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Successfully started 24 of 24 segment instances
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-----------------------------------------------------
20180801:16:45:35:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Starting Master instance gpmaster61 directory /greenplum/data/gpmaster/gpseg-1 
20180801:16:45:36:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Command pg_ctl reports Master gpmaster61 instance active
20180801:16:45:36:038131 gpstart:gpmaster61:gpadmin-[INFO]:-No standby master configured.  skipping...
20180801:16:45:36:038131 gpstart:gpmaster61:gpadmin-[INFO]:-Database successfully started
20180801:16:45:37:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Completed restart of Greenplum instance in production mode
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Scanning utility log file for any warning messages
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Log file scan check passed
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Greenplum Database instance successfully created
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:----------------------------------------------
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-To complete the environment configuration, please
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-update gpadmin .bashrc file with the following
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-1. Ensure that the greenplum_path.sh file is sourced
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-2. Add "export MASTER_DATA_DIRECTORY=/greenplum/data/gpmaster/gpseg-1"
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-   to access the Greenplum scripts for this instance:
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-   or, use -d /greenplum/data/gpmaster/gpseg-1 option for the Greenplum scripts
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-   Example gpstate -d /greenplum/data/gpmaster/gpseg-1
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Script log file = /home/gpadmin/gpAdminLogs/gpinitsystem_20180801.log
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-To remove instance, run gpdeletesystem utility
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-To initialize a Standby Master Segment for this Greenplum instance
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Review options for gpinitstandby
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-----------------------------------------------
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-The Master /greenplum/data/gpmaster/gpseg-1/pg_hba.conf post gpinitsystem
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-has been configured to allow all hosts within this new
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-array to intercommunicate. Any hosts external to this
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-new array must be explicitly added to this file
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-Refer to the Greenplum Admin support guide which is
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-located in the /greenplum/soft/greenplum-db/./docs directory
20180801:16:46:14:025963 gpinitsystem:gpmaster61:gpadmin-[INFO]:-------------------------------------------------

# 查看数据分片
psql -d testdb -c 'select a.dbid,a.content,a.role,a.port,a.hostname,b.fsname,c.fselocation from gp_segment_configuration a,pg_filespace b,pg_filespace_entry c where a.dbid=c.fsedbid and b.oid=c.fsefsoid order by content;'

此脚本用于安装失败时，回退删除任何实用程序创建的数据目录，postgres进程和日志文件。

cd ~/gpAdminLogs/
bash backout_gpinitsystem_gpadmin_<创建日期>
3.8 添加访问权限
echo "host     all         gpadmin         0.0.0.0/0       md5" >> $MASTER_DATA_DIRECTORY/pg_hba.conf
gpstop -u
3.9 添加standby主机(可选项)
gpinitstandby -a -F pg_system:/greenplum/data/gpmaster/gpseg-1/ -s gpstandby65

20180801:16:50:44:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Validating environment and parameters for standby initialization...
20180801:16:50:44:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Checking for filespace directory /greenplum/data/gpmaster/gpseg-1 on gpstandby65
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum standby master initialization parameters
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum master hostname               = gpmaster61
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum master data directory         = /greenplum/data/gpmaster/gpseg-1
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum master port                   = 5432
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum standby master hostname       = gpstandby65
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum standby master port           = 5432
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum standby master data directory = /greenplum/data/gpmaster/gpseg-1
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Greenplum update system catalog         = On
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:- Filespace locations
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:------------------------------------------------
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-pg_system -> /greenplum/data/gpmaster/gpseg-1
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Syncing Greenplum Database extensions to standby
20180801:16:50:45:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-The packages on gpstandby65 are consistent.
20180801:16:50:46:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Adding standby master to catalog...
20180801:16:50:46:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Database catalog updated successfully.
20180801:16:50:46:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Updating pg_hba.conf file...
20180801:16:50:48:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-pg_hba.conf files updated successfully.
20180801:16:50:51:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Updating filespace flat files...
20180801:16:50:51:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Filespace flat file updated successfully.
20180801:16:50:51:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Starting standby master
20180801:16:50:51:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Checking if standby master is running on host: gpstandby65  in directory: /greenplum/data/gpmaster/gpseg-1
20180801:16:50:53:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Cleaning up pg_hba.conf backup files...
20180801:16:50:54:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Backup files of pg_hba.conf cleaned up successfully.
20180801:16:50:54:038511 gpinitstandby:gpmaster61:gpadmin-[INFO]:-Successfully created standby master on gpstandby65

# 查看主备节点
psql -d testdb -c 'select * from gp_segment_configuration where content='-1';'

# 同步pg_hba.conf到gpstandby65备份节点，重新加载gpdb配置文件
gpscp -h gpstandby65 -v $MASTER_DATA_DIRECTORY/pg_hba.conf =:$MASTER_DATA_DIRECTORY/
gpstop -u
3.10 测试GPDB集群状态
gpstate -e
3.11 设置gpadmin远程访问密码
psql postgres gpadmin
alter user gpadmin encrypted password 'gpadmin';
\q
3.12 查询测试
psql -hgpmaster61 -p 5432 -d postgres -U gpadmin -c 'select dfhostname, dfspace,dfdevice from gp_toolkit.gp_disk_free order by dfhostname;'
psql -h gpmaster61 -p 5432 -d postgres -U gpadmin -c '\l+'
第4部分 部署安装 GreenPlum-cc-web 4.3
4.1 gpadmin创建gpperfmon数据库, 默认用户gpmon
gpperfmon_install --enable --password gpmon --port 5432

20180801:17:04:00:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-createdb gpperfmon >& /dev/null
20180801:17:04:54:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-PGPORT=5432 psql -f /greenplum/soft/greenplum-db/./lib/gpperfmon/gpperfmon.sql gpperfmon >& /dev/null
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-PGPORT=5432 psql template1 -c "DROP ROLE IF EXISTS gpmon"  >& /dev/null
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-PGPORT=5432 psql template1 -c "CREATE ROLE gpmon WITH SUPERUSER CREATEDB LOGIN ENCRYPTED PASSWORD 'gpmon'"  >& /dev/null
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-echo "local    gpperfmon         gpmon         md5" >> /greenplum/data/gpmaster/gpseg-1/pg_hba.conf
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-echo "host     all         gpmon         127.0.0.1/28    md5" >> /greenplum/data/gpmaster/gpseg-1/pg_hba.conf
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-echo "host     all         gpmon         ::1/128    md5" >> /greenplum/data/gpmaster/gpseg-1/pg_hba.conf
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-touch /home/gpadmin/.pgpass >& /dev/null
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-mv -f /home/gpadmin/.pgpass /home/gpadmin/.pgpass.1533114240 >& /dev/null
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-echo "*:5432:gpperfmon:gpmon:gpmon" >> /home/gpadmin/.pgpass
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-cat /home/gpadmin/.pgpass.1533114240 >> /home/gpadmin/.pgpass
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-chmod 0600 /home/gpadmin/.pgpass >& /dev/null
20180801:17:04:59:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-PGPORT=5432 gpconfig -c gp_enable_gpperfmon -v on >& /dev/null
20180801:17:05:02:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-PGPORT=5432 gpconfig -c gpperfmon_port -v 8888 >& /dev/null
20180801:17:05:05:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-PGPORT=5432 gpconfig -c gp_external_enable_exec -v on --masteronly >& /dev/null
20180801:17:05:06:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-PGPORT=5432 gpconfig -c gpperfmon_log_alert_level -v warning >& /dev/null
20180801:17:05:09:039490 gpperfmon_install:gpmaster61:gpadmin-[INFO]:-gpperfmon will be enabled after a full restart of GPDB
4.2 修改gpmon密码
psql -d gpperfmon -c "alter user gpmon encrypted password 'gpmon';"
4.3 添加监控授权
echo "host     all         gpmon         0.0.0.0/0    md5" >> $MASTER_DATA_DIRECTORY/pg_hba.conf
gpstop -afr

# 验证gpperfmon数据库是否有数据写入
psql -d gpperfmon -c 'select * from system_now'

# 拷贝主配置文件到备份配置文件(需要安装gpstandby备份节点)
gpscp -h gpstandby65 -v $MASTER_DATA_DIRECTORY/pg_hba.conf =:$MASTER_DATA_DIRECTORY/
gpscp -h gpstandby65 -v ~/.pgpass =:~/
gpstop -afr
4.5 安装greenplum-cc-web
./gpccinstall-4.3.0

Do you agree to the Pivotal Greenplum Command Center End User License Agreement? Yy/Nn (Default=Y)
y

Where would you like to install Greenplum Command Center? (Default=/usr/local)
/greenplum/soft/

Path not exist, create it? Yy/Nn (Default=Y)
y

What would you like to name this installation of Greenplum Command Center? (Default=gpcc)


What port would you like gpcc webserver to use? (Default=28080)


Would you like to enable kerberos? Yy/Nn (Default=N)


Would you like enable SSL? Yy/Nn (Default=N)


Installation in progress...
2018/08/01 17:54:49 
Successfully installed Greenplum Command Center.

We recommend ssh to standby master before starting GPCC webserver

To start the GPCC webserver on the current host, run gpcc start

To manage Command Center, use the gpcc utility.
Usage:
  gpcc [OPTIONS] 

Application Options:
  -v, --version   Show Greenplum Command Center version
      --settings  Print the current configuration settings

Help Options:
  -h, --help      Show this help message

Available commands:
  help        Print list of commands
  krbdisable  Disables kerberos authentication
  krbenable   Enables kerberos authentication
  start       Starts Greenplum Command Center webserver and metrics collection agents [-W]  option to force password prompt for GPDB user gpmon [optional]
  status      Print agent status  with  [-W]  option to force password prompt for GPDB user gpmon [optional]
  stop        Stops Greenplum Command Center webserver and metrics collection agents [-W]  option to force password prompt for GPDB user gpmon [optional]
4.6 添加环境变量
ln -s /greenplum/soft/greenplum-cc-web-4.3.0 /greenplum/soft/greenplum-cc-web
source /greenplum/soft/greenplum-cc-web/gpcc_path.sh
4.7 启动gpcc web服务
gpcc start
4.8 查询生成数据
# 查看时区
psql -d gpperfmon -c 'show timezone'

#查看监控日志
psql -d gpperfmon -c 'select * from system_now'
4.9 访问web页面

通过 http://192.168.61.61:28080 访问web监控

第5部分 集群性能检测
5.1 验证网络性能
gpcheckperf -f all_nodes -r N -d /tmp/
5.2 验证磁盘I/O和内存带宽性能
gpcheckperf -f all_nodes -r ds -d /tmp
5.3 验证内存带宽性能
gpcheckperf -f all_nodes -r s -d /tmp


            
            
                
                            
            
                
                    上一篇：Memcached+magent实现主从同步 +keepalived高可用群集

                
                
                    下一篇：微乐四冲辅助器开挂下载方法，原来真有挂件存在。                
            
            
            
                
                相关内容


    

    
    
        
        
            
            
                
                
                    
                    
                        
                        热门资讯
                        
                    
                    
                
                
            
            
            
            

                                
                
                    
                    
                        
                    
                    
                    
                    
                        中央网信办：平台发布短视频必选...
                        温馨提示：请尽量在wifi环境下观看视频！ 针对部分短视频内容来源不清、真假难辨、混淆视听等突出问题...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        关注5·19中国旅游日丨惠民与...
                        “5·19中国旅游日”将至，今年的主题为“乐享品质旅游·共赴美好山河”。河南将为广大游客送上惠民大礼...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        期待值拉满！两幕“星月对话”登...
                        5月19日、20日，天宇将接连上演金星合月、木星合月天象，两颗明亮行星依次与一弯蛾眉月近距离相伴。若...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        华为推出iNCR原子基站：极简...
                        IT之家 5 月 18 日消息，据华为无线网络官方昨晚分享，在世界电信日到来之际，湖北移动联合华为，...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        美国的伊朗困局：跳入陷阱还是承...
                        澎湃新闻特约撰稿 刘中民自4月8日至22日美以与伊朗之间为期两周的战争停火到期以来，美伊关系进入了战...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        湖北13岁男生遭教官殴打致伤，...
                        极目新闻记者梁传松5月18日，湖北阳新县联合工作专班发布消息称，在接到家长报案后，阳新县立即成立了联...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        金正恩下令：加强朝鲜南部边境一...
                        据凤凰卫视援引朝中社报道，5月17日，朝鲜领导人金正恩召开朝鲜人民军全军师旅指挥员会议，要求特别加强...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        缅甸发生5.2级地震，震源深度...
                        中国地震台网正式测定：05月18日10时05分在缅甸（北纬16.55度，东经96.25度）发生5.2...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        大学校门如何正确地开放
                        武汉大学校门开放后的第一个周末，情况如我的预期。如部分游客存在爬树拍照打卡、在操场直播学生上体育课等...
                    
                    
                
                                
                
                    
                    
                        
                    
                    
                    
                    
                        文科改名潮：加了“智能”二字，...
                        过去几年里，“文科无用”“文科就业难”的讨论不断发酵。高校文科专业的变动也频繁且剧烈，据教育部数据，...





    
    
        
        
            2026 ©
            太卓网叶县生活网 编程知识网  开创游戏网 菜丁网奥飞商务网  众乐知识网乐活家能源100网 泰达科技太卓开发网元素科技网八零商务网土豆游戏网        
        
        
        
                        
                科技资讯
            
                        
                技术分享
            
                        
                程序开发
            
                        
                设备维修

GreenPlum 5.10.0 集群部署

第1部分 初始化系统配置

1.1 部署环境

1.2 设置主机名、同步时间

1.3 添加hosts解析

1.4 系统内核参数优化

1.5 修改Linux最大限制

1.6 关闭 selinux 和 防火墙

1.7 设置XFS文件系统并挂载

1.8 禁用THP、调整磁盘预读扇区数

1.9 配置完毕，重启服务器

第2部分 安装GreenPlum

2.1 所有节点安装依赖包

2.2 创建安装目录

2.3 主节点安装软件

2.4 创建所有主机列表文件

2.5 设置主机免密码登陆

2.6 检查主机连接状态

2.7 批量创建安装用户

第3部分 同步greenplum软件到所有节点

3.1 切换用户初始化环境变量

3.2 创建主机列表文件

3.3 设置gpadmin免密登陆

3.4 同步greenplum软件包

3.5 gpadmin用户创建mdw和sdw的数据目录

3.6 创建初始化文件

3.7 初始化sdw主节点,部署smdw备份节点

3.8 添加访问权限

3.9 添加standby主机(可选项)

3.10 测试GPDB集群状态

3.11 设置gpadmin远程访问密码

3.12 查询测试

第4部分 部署安装 GreenPlum-cc-web 4.3

4.1 gpadmin创建gpperfmon数据库, 默认用户gpmon

4.2 修改gpmon密码

4.3 添加监控授权

4.5 安装greenplum-cc-web

4.6 添加环境变量

4.7 启动gpcc web服务

4.8 查询生成数据

4.9 访问web页面

第5部分 集群性能检测

5.1 验证网络性能

5.2 验证磁盘I/O和内存带宽性能

5.3 验证内存带宽性能

相关内容

热门资讯

第1部分初始化系统配置

1.6 关闭 selinux 和防火墙

第2部分安装GreenPlum

第3部分同步greenplum软件到所有节点

第4部分部署安装 GreenPlum-cc-web 4.3

第5部分集群性能检测