1.主要文件，访问该页面，该页面根据“验证页面”的返回结果设置本文件的返回状态 header('HTTP/1.1 '.$code.' '.$_status[$code])

复制代码 代码如下:

    ini_set('max_execution_time', 120);

    include("CheckConfig.php");

    function send_http_status($code) {
        static $_status = array(
        // Informational 1xx
=> 'Continue',
=> 'Switching Protocols',
        // Success 2xx
=> 'OK',
=> 'Created',
=> 'Accepted',
=> 'Non-Authoritative Information',
=> 'No Content',
=> 'Reset Content',
=> 'Partial Content',
        // Redirection 3xx
=> 'Multiple Choices',
=> 'Moved Permanently',
=> 'Moved Temporarily ',  // 1.1
=> 'See Other',
=> 'Not Modified',
=> 'Use Proxy',
        // 306 is deprecated but reserved
=> 'Temporary Redirect',
        // Client Error 4xx
=> 'Bad Request',
=> 'Unauthorized',
=> 'Payment Required',
=> 'Forbidden',
=> 'Not Found',
=> 'Method Not Allowed',
=> 'Not Acceptable',
=> 'Proxy Authentication Required',
=> 'Request Timeout',
=> 'Conflict',
=> 'Gone',
=> 'Length Required',
=> 'Precondition Failed',
=> 'Request Entity Too Large',
=> 'Request-URI Too Long',
=> 'Unsupported Media Type',
=> 'Requested Range Not Satisfiable',
=> 'Expectation Failed',
        // Server Error 5xx
=> 'Internal Server Error',
=> 'Not Implemented',
=> 'Bad Gateway',
=> 'Service Unavailable',
=> 'Gateway Timeout',
=> 'HTTP Version Not Supported',
=> 'Bandwidth Limit Exceeded'
        );
        if(array_key_exists($code,$_status)) {
            header('HTTP/1.1 '.$code.' '.$_status[$code]);
        }
    }

    function GetStatusCode($url)
    {
        $curl = curl_init();
        curl_setopt($curl, CURLOPT_URL, $url); //设置URL

        curl_setopt($curl, CURLOPT_HEADER, 1); //获取Header
        curl_setopt($curl,CURLOPT_NOBODY,true); //Body就不要了吧，我们只是需要Head
        curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1); //数据存到成字符串吧，别给我直接输出到屏幕了
        $data = curl_exec($curl); //开始执行啦～
        $HttpCode =curl_getinfo($curl,CURLINFO_HTTP_CODE); //我知道HTTPSTAT码哦～
        curl_close($curl); //用完记得关掉他
        return $HttpCode;
    }

    function ResetUrl($url)
    {
        if(strpos($url,"?")>0)
            $url.="&rnd";
        else
            $url.="?rnd";
        $url.=rand();
        return $url;
    }

    function ShowStateInfo($UrlArr,$MailPara)
    {
        $count=count($UrlArr);
        if(isset($_REQUEST["start"]))
        {
            $start=$_REQUEST["start"]*1;
        }
        else
        {
            $start=1;
        }
        if(isset($_REQUEST["end"]))
        {
            $end=$_REQUEST["end"]*1;
        }
        else
        {
            $end=$start;
        }

        $start=$start-1;
        $end=$end-1;

        if($start<0)
        {
            $start=0;
        }

        if($start>=0 && $start<$count)
        {
            if($end>=$count)
            {
                $end=$count-1;
            }

            if($end<$start)
            {
                $end=$start;
            }
            $sTime=date("Y/m/d H:m:s");
            echo "开始时间".$sTime."
";
            echo "检测结果
";
            for($i=$start;$i<=$end;$i++)
            {
                $url=ResetUrl($UrlArr[$i]);
                $state=GetStatusCode($url);
                echo "  ".$state ." => ".$url."";
                if($state!="200")
                {
                    echo " 本条访问出错！
";
                    send_http_status($state);

                    //发邮件
                    require("Mail.php");
                    $MailPara["Subject"]="网站监控结果";
                    $MailPara["Body"]="错误信息：状态->".$state."
地址：".$url;
                    SendResultMail($MailPara);

                    break;
                }
                echo "
";
            }
            $eTime=date("Y/m/d H:m:s");

            echo "结束时间".$eTime."
";
        }

    }
    ShowStateInfo($UrlArr,$MailPara);
?>

2.邮件

复制代码 代码如下:

function SendResultMail($MailPara)
    {
        require("phpmailer/class.phpmailer.php");

        $mail = new PHPMailer();
        $mail->CharSet = $MailPara["CharSet"];
        $mail->IsSMTP();
        $mail->Host = $MailPara["Host"];
        $mail->Port = $MailPara["Port"];

        $mail->SMTPAuth = true;

        $mail->Username = $MailPara["FromMail"];
        $mail->Password = $MailPara["FromMailPassword"];
        $mail->From = $MailPara["FromMail"];
        $mail->FromName = $MailPara["FromMailName"];

        foreach($MailPara["To"] as $toMail)
        {
            $mail->AddAddress($toMail["ToMail"], $toMail["ToMailName"]);
        }

        $mail->Subject = $MailPara["Subject"];
        $mail->Body = $MailPara["Body"];
        $mail->AltBody = $MailPara["AltBody"];

        if(!$mail->Send())
        {
            echo "邮件发送失败.

";
            echo "错误原因: " . $mail->ErrorInfo ."
";
            exit;
        }

        echo "邮件发送成功
";
    }

3.配置文件

复制代码 代码如下:

    $UrlArr=array(
        "localhost/test/281892.shtml",
        "localhost/test/all-229-1-221.shtml",
        "localhost/testclass/all-254-1-1.shtml",
        "localhost/test/cheng/bd/1988478.html",
        "localhost/test/asd/2066495.html"
    );

    //邮箱发送相关信息
    $MailPara=array(
        "CharSet"=> "GB2312",
        "Host"=> "smtp.exmail.qq.com",            // 邮箱服务地址
        "Port"=>25,

        "FromMail"=> "fdsafdsafd@fdasfds.com",    // 发件人邮箱地址
        "FromMailPassword"=> "*********", // 发件人邮箱密码
        "FromMailName"=> "检测",            //发件人称呼

        "To"=>array(
            array(
                "ToMail"=>"defdafdsafdsafdf@qq.com",        //收件人邮箱地址
                "ToMailName"=> "bqq",            //收件人称呼
            ),
            array(
                "ToMail"=>"abfdsafdsafdsafc@gmail.com",        //收件人邮箱地址
                "ToMailName"=> "agmail",            //收件人称呼
            )
        ),

        "Subject"=> "",                //邮件标题
        "Body"=> "",            //邮件内容
        "AltBody"=> "附加信息"                //附加信息，可以省略       
    );

?>